Price discounted 10% off for a limited time! Print Carbon Fiber and a selection of polymers with the aid of a 60°C heated chamber.
MakerBot Method Carbon Fiber Edition
Print carbon fiber reinforced nylon and other engineering-grade composite parts with three dimensional strength and accuracy like never before on METHOD’s unique industrial desktop platform.
Strong, Heat-Resistant Metal Replacement Parts
Carbon fiber reinforced nylon is optimized for high strength, stiffness, and heat resistance making it ideal for structural applications and metal replacements.
Excellent strength to weight ratio - 110 MPa TS - for lightweighting applications such as robotic end effectors
Engineering-grade stiffness - 7600 MPa Tensile Modulus - for structural applications such as vehicular brackets and inspection gauges
High heat resistance under load - 184°C HDT - for optimal under-hood and tooling applications
Superior Nylon Carbon Fiber Parts with METHOD
METHOD’s unique industrial feature set produces carbon fiber parts with superior three dimensional strength and accuracy
METHOD’s Heated Chamber delivers parts that are strong and accurate.
Outstanding surface finish that hides layer lines thanks to METHOD’s Ultra-Rigid Metal Frame.
Print the most complex geometries including internal cavities with soluble support, or use breakaway support for faster print times.
METHOD’s sealed filament bays help keep the material dry, resulting in better print quality and reliability, and METHOD’s pre-print spool drying feature allows for the recovery of oversaturated filament.
WHAT'S IN THE BOX:
- 1 MakerBot METHOD 3D Printer
- 1 Spring Steel Build Plate
- 1 Composite Extruder
- 1 Performance Extruder 2 Support
- 1 Nozzle Brush
- 1 Hex Key
- 1 USB A-to-B Cable
- 1 US Power Cord
- 1 EU Power Cord
Please note: MakerBot materials sold separately.
Extruder Compatibility
- Compsite Extruder 1C (included)
- Support 2 (included)
- MB Labs Experimental Extruder*
*sold separately
Model and Support Material Compatibility
Model Material
- Nylon Carbon Fiber
- PLA
- Tough
- PETG
- Nylon
- Open materials**
Support Material
- PVA
**requires MB Labs Experimental Extruder
Method Specs:
Print Technology
Fused Deposition Modeling (FDM)
Print Heads
2
Dimensional Accuracy
± 0.2 mm1
Layer Resolution
Range: 20 - 400 microns
Build Speed
Up to 2x faster than desktop 3D printers2
Max Material Flow Rate: ~50 mm3 per sec
Print Head Travel Speed: Up to 500 mm per sec
Print modes tuned and optimized for:
100 microns - High Quality Print Mode (Coming Soon)
200 microns - Balanced Print Mode
Maximum Build Volume
19 L x 19 W x 19.6 H cm / 7.5 x 7.5 x 7.75 in single extrusion (print settings coming soon)
15.2 L x 19 W x 19.6 H cm / 6.0 x 7.5 x 7.75 in dual extrusion