workcell

Storage Bin 1: Tray

Part	Photo	Part Number	Quantity	Location
#8-32 x 1/4" Star Drive Screw		276-4990-001	300
#8-32 x 3/8" Star Drive Screw		276-4991-001	100
#8-32 x 1/2" Star Drive Screw		276-4992-001	300
#8-32 x 3/4" Star Drive Screw		276-4994-001	100
#8-32 x 1.000" Star Drive Screw		276-4996-001	100
#8-32 Nylock Nut		275-1027-001	400
Flat Bearing		276-1209-001	105
1/2" Standoff		275-1014-001	40
3/4" Standoff		275-1015-001	4
1.00" Standoff		275-1016-001	52
1.50" Standoff		275-1017-001	2
2.00" Standoff		275-1018-001	34
3.00" Standoff		275-1020-001	28
6.00" Standoff		275-1023-001	4
0.125” Spacer		276-5912-001	30
0.25” Spacer		276-5913-001	30
0.375” Spacer		276-5914-001	30
0.50” Spacer		276-5915-001	30
1x1 Connector Pin		228-3616-060	4
2x3 Right Angle Beam		228-3616-145	2
Double 2x Wide, 2x2 Corner Connector		228-3201-220	1
Linear Slide		228-3616-217	1
1x3 Center Lock Beam		228-3201-1141	2
Star Drive Shaft Collar		276-6103-000	96
1” or 2x Drive Shaft		288-2500-117	20
2” or 4x Drive Shaft		288-2500-120	30
3” or 6x Drive Shaft		288-2500-122	20
4” or 8x Drive Shaft		288-2500-124	10
Claw Gear Crank		276-6010-003	3
6T High Strength Sprocket		276-2252-003	8
Gear Metal Insert		276-2250-005	84
High Strength Gear Insert		276-2250-006	84
12T Gear HS Insert		276-2250-007	1
12T High Strength Gear w/ ¼” Bore		276-2250-008	1
12T Metal Gear		276-6010-011	12

Once all of the parts from the Workcell Kit have been placed into the tray of Storage Bin 1, the tray will look like this image.