MakerBot METHOD X ASA Filament Black (.65kg, 1.43lb)

MakerBot METHOD X ASA Filament Black (.65kg, 1.43lb) UV AND MOISTURE RESISTANCE FOR DEMANDING OUTDOOR APPLICATIONS.

ASA combines the qualities of ABS with the added benefit of UV resistance and additional moisture resistance making it ideal for equipment exposed to sunlight and rain over long periods of time – such as products for the agriculture, transportation, and power and utility industries.

Printer Compatibility

• Method X
  

Extruder Compatibility

• Material Extruder 1XA
• Support Extruder 2XA
  

Support Material

• Stratasys® SR-30

Dimmensional Accuracy

• Finished part dimensional accuracy of    ± 0.2mm (± 0.007in)

TECH SPECS                                                                        Imperial         Metric

Heat Deflection (ASTM 648, 66 psi)                                 204°F             96°C

Flexural Modulus (ASTM D790, 15 mm/min)                 330,000 psi     2,300 MPa

Tensile Strength at yield (ASTM D638, 50 mm/min) 7100 psi             49 MPa

Tensile Modulus (ASTM D638, 50 mm/min)                 310,000 psi     2,100 MPa

Strain at Yield - Elongation (%)                                              >6%             >6%

Notched Impact Strength (ASTM D256)                          2.6 ft-lb/in     140 J/m

 WARNING: This Filament - when used in the operation of 3D Printers or 3D Pens - can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer. www.P65Warnings.ca.gov.