Your shopping cart is empty!
0
$0.00
0
$0.00
These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding. Size: 12 inch x 15 inchMaterial: Black Rubber over Silk Mesh
..
These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding. Size: 12 inch x 15 inch"Material: Black Rubber over Silk Mesh
..
Metal version of the shaft locking part. Three locations for square shafts.
Very strong.
Made from cold rolled steel, 0.046" thick, zinc plated.
Sold in packs of 8.
Technical Specifications
Downloads
STEP File
..
A spacer is used to create a space between two objects, often to properly position them. They eliminate slop on shafts, add space between metal parts and are made of plastic and nylon. Variety pack includes:(10) 0.125" Nylon Spacer(10) 0.250" Nylon Spacer(10) 0.375" Nylon Spacer(..
These plastic thumbscrews are the same size (8-32) as standard VEX screws only they have a 0.428" diameter knurled head so they can be tightened or loosened by hand. Great for applications where a screw will be inserted or removed multiple times, such as robot access panels or battery mou..
(10) Bearing FlatsMaterial: AcetalGive your motors something to turn with VEX EDR Drive Shafts. Use Bearings and Shaft Collars to keep your mechanisms and wheels moving smoothly, and locked into place. Use spacers if certain parts of your robot need to be properly positioned, or you need..
Mecanum wheels allow savvy robot designers to create drivetrains capable of moving in any direction using a standard chassis shape. Simply power each wheel with a different motor and by changing the directions the wheels spin get your robot to move in different directions!
Allows r..
Upgrade your tires.
The VEX 4" High Traction Tires are replacements for the "all-purpose" treads found on VEX 4" diameter wheels. These tires are designed to provide high traction on smooth surfaces. Use with 4" VEX Wheels
*Note: Wheel rims not included. Simply remove the current 4..
(4) 2.75" diameter wheels. Removing the tread of the 2.75" wheel reveals a low-friction wheel that can be used for other purposes. Offered in multiple sizesHigh traction tire profileVersatile wheel inserts for a variety of applicationsTread is made of rubber and wheel is ABS plastic
..
Traction Wheels offer optimal grip on soft surfaces like the foam tiles used in the VEX Robotics Competition. There are versatile wheel inserts for a variety of applications. Removing the tread of the 4" wheels reveals a ribbed plastic wheel.Pack includes: (4) 4" Diameter Traction Whee..
Intake rollers are specifically designed for ball intake systems. The flexible rubber fingers grip the ball. The fingers also deflect, allowing for ball size variation.•Available in a (2) or (8) pack.•Rubber fingers.•Hard plastic center with square hole.
..
This kit provides the ability to implement a winch and pulley system and create block and tackle mechanisms to utilize mechanical advantage.•Lift, lower, hang, drag and more.•Configurable for many applications.•Ratchet and Pawl can be engaged to prevent back driving.Kit Includes:(1) Winch Bracket(1)..
The VEX Turntable Bearing Kit provides two options for low friction, high load rotational joints. These are especially well suited for rotational joints with lots of side load - this kit makes it easy to build a turret on your robot! Integrated gearing makes each turntable simple to actuate w..
Bearing Blocks mount on a piece of structure and supports a shaft which is offset either above, below, or to the side of the structure.
Lock Bars allow any VEX component to be “locked” to a shaft so that it will spin with the shaft.
Note: These items are not sold separ..
20 pack Plastic Spacers, 4.6 mmA spacer is used to create a space between two objects, often to properly position them. Available in various lengths.
Eliminate slop on shafts.
Add space between metal parts.
Plastic and Nylon options
..
A spacer is used to create a space between two objects, often to properly position them. This pack includes (20) 8mm Plastic Spacers. Spacers are compatible with all VEX screws and shafts. • Eliminates slop on shafts.• Adds space between metal parts.• Made of Plastic and Nylon.
..
Servo motors are a type of motor that can be directed to turn to face a specific direction, rather than just spin forward or backward.
Expand functionality
Add pan and tilt to a camera
100 degrees of rotation
Do exact positioning
Technical Specific..
The Sprocket & Chain Kit includes five different sprocket sizes that allow for a variety of ratios, and 4 feet of chain. Great for any application where you need to transfer power across long distances. It is designed to carry moderate loads. Every section of chain is a master link.Kit Inc..
This kit contains four sizes of VEX Spur Gears (12-, 36-, 60-, and 84-tooth gears). The 60- and 84-tooth gears have extra mounting holes for attaching metal bars or parts to these gears when using them as part of a turntable system or similar design.
Create robot transmissions, gea..
High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up to 50 pounds, so make sure to use them..
Drive on.
The 2-Wire Motor 393 is the primary actuator used in the VEX Robotics Design System. Build rotational mechanisms, drive bases, rotational joints, conveyor belts - anything that spins can be built using the 2-wire Motor 393.
Strong, steel internal gears.
Can be configur..
Gears are one of the primary sources of power transmission in VEX EDR. We offer a variety of both normal and high strength gears, that come in a multitude of shapes and sizes. Start with a simple project like building a gear reduction, and work your way up towards building more complex mechanism suc..
The VEX Motor Controller 29 uses a standard PWM signal (like that originating from the 3-wire ports on VEX Microcontrollers) to drive a VEX 2-Wire Motor.Note: We recommend using no more more than one (1) 3-Wire extension cable in between the Motor Controller 29 and a VEX Microcontroller. For longer ..
These upgrade links should be useful to designers wishing to create more advanced mechanisms utilizing the tank tread.
Different Tread-Links Increase Functionality.
Get High-Traction on Smooth Surfaces.
Compatible with Tank Tread Kit, High Strength Chain & Sprocket..
These make mounting Flats Bearing onto VEX structural component easy. Reusable; simply push the pin out from the back side.
Speed up robot assembly.
50 ea of the Bearing Pop Rivets.
Reusable.
Technical Specifications
..
This Top Recommended Add-On Kit includes pieces specifically recommended by VEX builders to maximize versatility. Contains over 600 pieces of VEX Structural and Motion Components.
(1)Steel Chassis 25x25x2
(14)Steel Plates & Bars
(6)Steel Angles
(6)Steel C-C..
(12) High Strength 12-tooth Gear (0.58 inch diameter)(12) 12-Tooth Pinion Gear Inserts..
Lose your gears? This convenient replacement gear pack for the 2 Wire Motor 393 (only) will get you going again without having to purchase a new motor. Includes one full set of gears.Kit Includes:•(1) High Speed Gear Set•(1) High Torque Gear Set•(1) Set of replacement case assembly screws&nb..
Universal joints provide a mechanical link between two intersecting, non-parallel shafts. Each side of the VEX U-Joint includes a socket for a VEX square shaft, and a set-screw to hold the shaft in place.
Create complex robot mechanisms
Transfer power "around corners" and..
The High Strength Shaft Bearing is a larger version of the Bearing Flat that is designed for the 0.25" High Strength Shafts. VEX EDR 2", 3", and 4" High Strength Shafts are actually designed about 1mm shorter than their respective 2", 3", and 4" 8-32 Standoffs. This means that if you use stand..
High Strength Shaft 3" Long (4-Pack) VEX EDR High Strength Shafts and hardware are specifically designed for those applications that typical shafts just can't handle. Use these shafts in high-torque or high-impact situations, and never worry about your gearbox or intake breaking again. ..
Larger 1/4" shafts are tougher, stronger, and ready for even the most stressful robotic applications. These thicker shafts are less resistant to both twisting and bending fatigue, meaning that you should have no fear of designing high-torque gearboxes or high-impact drivetrains.
Works with a..
A pack of (4) of the VEX 3.25" diameter wheels. These wheels include a tire designed for optimal grip on soft surfaces like the foam tiles used in the VEX Robotics Competition. Removable wheel inserts allow for additional versatility - use these wheels with either standard Drive Shafts or High Stren..
Use the Turbo Gear Set to push your motors to the fastest speeds ever seen in VEX robotics. This gear pack replaces the gears inside a 2-Wire Motor 393 for high-RPM, low-torque applications.
Only for 2-Wire Motor 393
240 RPM output speed is 140% faster than standard gearing
Use with ex..
High Strength Sprocket 6 Tooth (8-Pack)High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up to..
These reinforced sprockets and chain can transmit higher loads over long distances. Use this kit to withstand higher stresses and lift heavier loads. Useful for any application where regular chain just won't cut it.
High Strength Design - lift up to 50 lbs
12 Sprockets in 5 Siz..
High Strength Sprocket 18 Tooth (4-Pack) High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up ..
High Strength Sprocket 24 Tooth (4-Pack)High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up t..
High Strength Sprocket 30 Tooth (4-Pack)High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up t..
Removable High Strength Shaft Inserts for High Strength Gears and some wheels that allow for versatility in user application. Switch from a driven gear (square hole) to a free spinning one (round hole) in seconds.•Increased versatility during design and construction•Free spinning plastic and high st..
Shaft Collars lock to drive shafts, keeping wheels and gears from sliding along the shaft. Collars fit around Drive Shafts and can be fastened in place using a setscrew.•Designed specifically for VEX EDR Drive Shafts•Set screw uses the same Hex Key as the 6-32 Motor ScrewsIncludes:•(10) Clamping Sha..
Spare plastic trucks from the VEX EDR Linear Motion Kit. Includes:(8) Inner Slide Trucks(8) Outer Slide Trucks.
..
Rack Gears can be used to turn rotary motion into linear motion.•Use any VEX spur gear as a pinion to drive these rack gears. •Stack multiple rack gears back to back for longer motions.•Combine these with a VEX linear slide and Rack Gear Bracket (sold separately) to create a simple linear actuator.N..
The VEX Turntable Bearing Kit V2 provides two options for low friction, high load rotational joints. These are especially well suited for rotational joints with lots of side load - this kit makes it easy to build a turret on your robot! Integrated gearing makes each turntable simple to actuate wh..
The V5 Claw Kit provides additional functionality to any robot build by allowing you to easily grab and manipulate objects.Note: Motor required and not included.Dexterous enough to grab a featherComes partially assembledCompatible with all VEX Mechanical PartsKit Content
(1) V5 Claw..
Use these spacers if certain parts of your robot need to be properly positioned, or you need to add space between metal...
Build all terrain robots!
This kit contains over five feet of tank tread designed specifically for the VEX Robotics Design System. Use this tank tread to build robot tracks which can overcome tough terrain, or build a conveyor belt for scooping up objects.
Climb over obstacle..
High Strength Conveyor Chain (276-7141)(60) High Strength Conveyor Chain Links..
Larger 1/4" shafts are tougher, stronger, and ready for even the most stressful robotic applications. These thicker shafts are less resistant to both twisting and bending fatigue, meaning that you should have no fear of designing high-torque gearboxes or high-impact drivetrains.
Works with all&nbs..
Use the High Strength Chain Attachment Link Kit to attach structural components to your chain..
36T High Strength Gear v2 (8-pack) (276-7747)..
Build mechanisms capable of achieving higher torque or speed than ever before - lift heavier loads and survive bigger impacts with the additional gear ratio options provided by the largest high strength gear available. Works with the VEX High Strength Gear Kit or any VEX spur gear. D..
Omni-Directional Anti-Static wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). These wheels are the same size as the VEX 3.25" Traction Wheels. Removable wheel inserts allow for additional versatility - use these wheels with either standar..
8T Sprocket, 6P (8-pack)6P Sprockets were designed to be smaller in diameter than the pre-existing High Strength Sprockets, allowing for the construction of smaller, more compact mechanisms.
Note: 6P Sprockets use VEX IQ Chain, and are not compatible with V5 High Strength Chai..
The High Strength Shaft Bearing is a larger version of the Bearing Flat that is designed for the 0.25" High Strength Shafts. VEX EDR 2", 3", and 4" High Strength Shafts are actually designed about 1mm shorter than their respective 2", 3", and 4" 8-32 Standoffs. This means that if you use stand..
Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain. These are anti-static wheels.
2.75" diameter
14 rollers per whe..
(Ships March 31st or Later)As the name suggests, an Omni-Directional Wheel can travel in more than one direction. When the axle spins, it behaves like a normal wheel. However, you’ll notice that there are rollers all around the outer circumference. These rollers allow the wheel to travel sideways..
The High Strength Shaft Bearing is a larger version of the Bearing Flat that is designed for the 0.25" High Strength Shafts. VEX EDR 2", 3", and 4" High Strength Shafts are actually designed about 1mm shorter than their respective 2", 3", and 4" 8-32 Standoffs. This means that if you use stand..
16T Sprocket, 6P (8-pack)6P Sprockets were designed to be smaller in diameter than the pre-existing High Strength Sprockets, allowing for the construction of smaller, more compact mechanisms.
Note: 6P Sprockets use VEX IQ Chain, and are not compatible with V5 High Strength Cha..
24T Sprocket, 6P (8-pack)6P Sprockets were designed to be smaller in diameter than the pre-existing High Strength Sprockets, allowing for the construction of smaller, more compact mechanisms.
Note: 6P Sprockets use VEX IQ Chain, and are not compatible with V5 High Strength Cha..
32T Sprocket, 6P (4-pack)6P Sprockets were designed to be smaller in diameter than the pre-existing High Strength Sprockets, allowing for the construction of smaller, more compact mechanisms.
Note: 6P Sprockets use VEX IQ Chain, and are not compatible with V5 High Strength Cha..
40T Sprocket, 6P (4-pack)6P Sprockets were designed to be smaller in diameter than the pre-existing High Strength Sprockets, allowing for the construction of smaller, more compact mechanisms.
Note: 6P Sprockets use VEX IQ Chain, and are not compatible with V5 High Strength Cha..
Compatible with VEX EXP products and accessoriesVRC, VEX U, VAIC, FTC legal.High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position ..
Compatible withproducts and accessories.VEX Robotics Competition, VEX AI Competition, VEX U legalThis kit contains everything needed to get a classroom or VEX Robotics Competition team up and running with Pneumatics.Pneumatics deliver fast and powerful linear motion that is useful in a variety of ap..
Showing 1 to 68 of 68 (1 Pages)
